How to Change Dirt Bike Grips: Step-by-Step Guide

Author:

Published:

Updated:

Affiliate Disclaimer

As an affiliate, we may earn a commission from qualifying purchases. We get commissions for purchases made through links on this website from Amazon and other third parties.

As an Amazon Associate, I earn from qualifying purchases.

To change dirt bike grips, start by removing the old grips, cleaning the handlebars, and installing the new grips using grip glue or other methods like zip ties or hairspray. There are several YouTube videos available that provide step-by-step instructions on how to change dirt bike grips, such as “How to Install Dirt Bike Grips – Episode 152” and “5 Easy Ways to Install Dirt Bike Grips.”

Make sure to choose the method that works best for you and follow the instructions carefully to ensure a secure and comfortable grip on your dirt bike.

Tools And Materials Needed

To change dirt bike grips, you will need a few tools and materials. For tools, you will require a screwdriver, pliers, and a utility knife. Additionally, you will need a new pair of grips and grip glue. These materials are essential for a successful grip change.

Removing Old Grips

Removing Old Grips To remove old dirt bike grips, follow these step-by-step instructions for an easy removal process that won’t damage the handlebars. First, gather the necessary tools for the task. You will need a flathead screwdriver, pliers or vice grips, and a utility knife.

Start by using the flathead screwdriver to pry at one end of the grip. Gently work your way around, lifting the grip as you go. If the grip is stubborn and won’t come off, use the pliers or vice grips to grip the end of the grip and twist it in a rocking motion to loosen it.

Once the grip is loose, slide the utility knife under the grip to cut through any adhesive or glue that may be holding it in place. Be careful not to damage the handlebars. Repeat this process for the other grip, and you’ll have successfully removed the old dirt bike grips without any hassle.

Cleaning The Handlebars

Cleaning the handlebars is an essential step before installing new dirt bike grips. Neglecting to clean the handlebars can affect the grip’s performance and longevity. To clean the handlebars, start by removing the old grips using a grip removal tool or by cutting them off.

Once the grips are removed, use a degreaser or a mild soap and water solution to clean the handlebars thoroughly. Scrub the handlebars with a brush to remove any dirt, grime, or residue. Rinse the handlebars with water and dry them completely using a clean towel.

It’s crucial to ensure that the handlebars are free from any debris or moisture before installing the new grips to ensure a secure and comfortable fit. Following these cleaning steps will help you maintain the performance of your dirt bike grips and prolong their lifespan.

Installing New Grips

Installing new dirt bike grips is a step-by-step process that can be done easily with the right technique. Whether you have twist throttles or regular handlebars, there are different methods to follow. For twist throttles, start by removing the old grips and cleaning the bars.

Then, apply grip glue and slide the new grip onto the throttle tube. For regular handlebars, remove the old grips and clean the bars as well. Next, apply grip glue to both the handlebar and the inside of the new grip.

Slide the grip onto the handlebar and align it properly. It’s important to secure the grip in place using safety wiring or zip ties. Repeat the process on the other side and ensure everything is tightly secured. With these simple steps, you can easily change the dirt bike grips and improve your riding experience.

Applying Grip Glue

Applying grip glue is essential for achieving a secure and long-lasting grip on your dirt bike. To ensure proper application, follow these six guidelines. First, gather all the necessary items for the installation process. Next, remove the old grips and clean the handlebars thoroughly.

Then, apply grip glue evenly onto the handlebars, ensuring complete coverage. After applying the glue, carefully slide the new grip onto the handlebars, making sure it is aligned properly. Lastly, allow the glue to dry completely before using your dirt bike.

By following these steps, you can ensure that your grips will stay in place during intense rides, providing you with better control and comfort.

Securing The Grips

To secure the grips on your dirt bike, follow these tips for a secure installation. First, gather all the required items for the installation process. Remove the old grips from the handlebars and make sure to clean the bars thoroughly.

Next, install the new grips, making sure to align them properly. If you have a twist throttle, follow the specific instructions for installing grips on it. Apply grip glue to ensure a strong bond between the grips and the handlebars.

Additionally, for added security, consider safety wiring the grips. Start by installing the first wire and repeat the process on the other side. Following these guidelines will help keep your dirt bike grips securely in place while you ride.

Frequently Asked Questions On How To Change Dirt Bike Grips

How Do You Put Grips On A Dirt Bike Without Glue?

To put grips on a dirt bike without glue, follow these steps: 1. Remove the old grips. 2. Clean the handlebars. 3. Moisten the inside of the new grips with water or rubbing alcohol. 4. Slide the moistened grips onto the handlebars, twisting and pushing firmly.

5. Let the grips dry and settle for a few hours before riding.

How Do You Take Grips Off A Dirt Bike?

To remove grips from a dirt bike, follow these steps: 1. Get the necessary tools. 2. Start by loosening the grip with a utility knife or grip wire. 3. Slide the grip off the handlebar. 4. Clean any adhesive residue. 5.

Install new grips if needed. Remember to take caution and proceed carefully when removing dirt bike grips.

How Do You Put A Grip On A Dirt Bike?

To put a grip on a dirt bike, follow these steps: 1. Remove the old grips. 2. Clean the handlebars. 3. Apply grip glue to the handlebars. 4. Slide the new grips onto the handlebars. 5. Allow the glue to dry completely before riding.

Conclusion

Changing the grips on your dirt bike is a simple yet essential task that can greatly improve your riding experience. Whether you’re looking for better control, more comfort, or just a fresh look, knowing how to change dirt bike grips is a valuable skill for any rider.

In this blog post, we covered five easy methods for removing and installing new grips, including the zip tie method, hairspray method, electrical tape method, gasoline installation, and traditional grip glue. Each method has its advantages and disadvantages, so you can choose the one that best suits your needs.

Remember to clean the bars thoroughly before installing the new grips and follow the appropriate safety measures, such as safety wiring. With the right tools and techniques, you can effortlessly change your dirt bike grips and hit the trails with confidence.

Don’t let worn-out grips hold you back – take control of your ride and enjoy the thrill of a fresh grip.


Rate this post

About the author

Leave a Reply

Your email address will not be published. Required fields are marked *

Latest posts

  • Can You Put 27 5 Wheels On A 29Er: Unveiling the Ultimate Upgrade

    Can You Put 27 5 Wheels On A 29Er: Unveiling the Ultimate Upgrade

    As an Amazon Associate, I earn from qualifying purchases.Yes, you can put 27.5 wheels on a 29er bicycle as long as the frame and brakes allow for the smaller wheel size. Swapping to smaller wheels can improve agility and maneuverability on rough terrain.   It’s essential to consider the impact on the bike’s geometry, bottom…

    Read more

  • What is a Wet Bike

    As an Amazon Associate, I earn from qualifying purchases.A Wet Bike is a planing motorized watercraft that combines the features of a motorcycle and a jet ski. It is propelled by pump jets, similar to other personal watercraft. The original Wetbike was introduced by Spirit Marine and marketed as a “water motorcycle” with the thrill…

    Read more

Share via
Copy link